top of page
Ideal Logic Max Combi C35 35kW Boiler
Ideal Logic Max Combi C35 35kW Boiler
 
Overview
 
Inclusive of all labour and Parts 
 
The Ideal Logic Max Combi 35kW boiler combines the same great features as Ideal's award-winning Logic+ with the addition of a high quality Ideal System filter. Designed with quality in mind, the Logic Max Combi keeps the compenent count low to maximise reliability, these include the latest generation Honeywell gas valve and a diverter valve design with no dynamic seals. This compact 35kw boiler is also easy to install thanks to its low lift weight, wide range of flueing options, preformed copper tails, built in filling loop and can be installed in a kitchen cupboard. The Ideal Logic Max Combi comes with a 10 year warranty and features service indication, preheat function and compatability with a range of additional controls.
 
  • 10 year warranty
  • Ideal System filter included in box
  • Compact cupboard fit
  • Large back-lit display
  • Easy to see pressure gauge
  • Fully modulating operation to low outputs
  • Easy to install and service
  • Compatible with Ideal Touch Combi RF and Ideal Touch Connect
  • Built in frost protection
  • NOx Class 6
 
Technical 
 
ERP Efficiency94%
ERP RatingA
Boiler TypeCombi
Depth278 mm
Height700 mm
Width395 mm
Maximum Horizontal Flue 100mm6m
Maximum Vertical Flue 100mm7.5 m
External or InternalInternal
DHW Output35.3 ltrs / min
DHW Flow Rate at 35 Degree Rise14.5 l/m
DHW Output Min and Max7.1-35.3 kW
SEDBUK SAP 2009 Rating89.60%
SEDBUK SAP 2005 Rating91.10%
CH Condensing Max Output25.6 kW
Heat Output35 kW
Fuel TypeNatural Gas
IncludesBoiler and System Filter
Noise Level44 dBA
Nox Class6
Solar CompatibleNo
TypeBoiler
Years Guaranteed10
Made To OrderN
Manufacturer Model No218874
Brand NameIdeal Boilers

Ideal Logic Max Combi C35 35kW Boiler

£2,553.96Price

Existing Boiler

Disconnect the existing boiler and remove from site.

 

New Boiler

Supply and install new boiler in same location as existing

 

• Water treatment inhibitor

• Gas Safe and Building Control Certificate.

• Commissioning new boiler

• Copper Pipes and miscellaneous materials

• Filling loop

• Horizontal Flue.

• Removal of old boiler.

• Warranty on boiler (Manufacturers T&C's apply)

 

Condensate pipe

The condensate pipe will be connected into a soak-away or into the existing rain water/ fowl sewer drainage system

 

Room Stat

To meet the current building regulations, we will include in our estimate for installing the following modern controls

 

• Wireless room thermoset

 

A new balanced horizontal flue will be fitted from the boiler through the wall/roof and terminated externally.

 

Electrical works

Allowance has been made for wiring the controls on the boiler and to the controls mentioned above.

 

The mains supply to the boiler and controls will be taken from an adjacent point with all wiring hidden where possible, otherwise run on the surface of adjacent walls

 

No allowance has a been made for service cross bonding which may be required in the house. If this is not present our electrician will advise you.

 

Gas Service

The gas service will be taken from the existing 22mm supply and connected to the control valve on the boiler.

 

System Clean

To meet the current building regulations and conditions of the boilers warranty the heating system needs to be flushed out in accordance to BS7593.

 

This is because the heat exchangers in the new boiler are a lot smaller and can be prone to damage from sediment from radiators.

 

To ensure we remove as much sediment from the sytem as possible we ude a power flushing machine with the aid of Frenox cleaner.

 

This is a long process as each radiator is separately power flushed until the water running through the cleaner is clean.

 

To improve the process, we also agitate the sediment by quickly altering the direction of water flowing through the system and use a rubber mallets or mechanical agitator or magnetic roller on the radiators.

On completion of the works the use of the controls will be demonstrated and a handover pack will be issued with all relevant documentation require to sustained a health system

 

Testing and Commissioning

On completion of the works the use of the controls will be demonstrated and a handover pack will be issued with all relevant documentation require to sustained a health system

 

Handover

On completion of the works the use of the controls will be demonstrated and a handover pack will be issued with all relevant documentation require to sustained a health system

 

Protection

Throughout the duration of the works we will install full carpet/flooring protection to all works areas and access routes with the addition on dust sheets where appropriate.

 

All works areas will be left clean and tidy upon each day’s work and we will endeavour to keep dust levels to a minimum throughout

bottom of page